Aygunit-Wet Mix AF

High performance set accelerator and water impermeability additive used in shotcrete, without alkali

Non-alkali high performance spraying concrete admixture

Standart
Bayındırlık Bakanlığı Poz No: 04.613/5-B2
TS EN 934 - 5 Çizelge 2 Alkali olmayan püskürtme beton priz hızlandırıcı katkı

 

Description
Aygunit-Wet Mix AF, alkali free, high performance stiffening accelerator and water tightness additive that is used in spraying concrete and gunitage.

• Consolidation of first and water in tunnel, gallery and subterranean structures,
• Consolidation of excavation and chamfers
• Water tight plaster application of water tanks, support tanks, dams, water pools and docks.
• Sparying application of shed and domes,
• It is used in reinforcement of ceilings, columns and bridge parts.

• It eases overhead applications by means of increasing addhesion between rocks and concreted with spraying concrete.
• In applications like tunnel, mine etc., It allows spraying thick concrete layers in one time thanks to its rapid stiffening feature.
• Early endurance development
• Lesser outpouring (rebound).
• In dry mixes, it eases tight textured dense concrete.
• It is alkali free and prevents additional pollution to surface and subterenean waters.
• Do not contain chlorin and do not harm equipments.

• Dosage of the Aygunit-Wet Mix AF can vary according to surface and air temperature. Also, used cement balance effects the dosage. So, in order to determine the dosage, preliminary tests must be done.
• Aygunit-Wet Mix AF usage range is 4.0% - 7.0% of the cement weight. When using more additive than usage range, final resistance may be lower.

Kimyasal İçeriği / Chemical Contents : Alüminyum sülfat içerikli karışım / Mixture of aluminum sulphate
Görünüm-Renk / Appearance-Colour : Bej (bulanık) sıvı / Beige (blurry) liquid
Yoğunluk / Density : 1.45 ± 0.03 kg/l. ISO 758
pH Değeri / pH Value : 3.0 ± 1 TS 6365 EN 1262
Viskozite / Viscosity : 50 ± 5 cP Aydos/TA 042
Klor İçeriği / Chloride Content (Cl) : < % 0.1 TS EN 480-10
Alkali İçeriği / Alkali Content       : < % 1 TS EN 480-12
Donma Noktası / Freezing Point : -1 ºC  
Korozyon Davranışı / Corrosion Behavior : Sadece TS EN 934-1 Ek A.1’de verilen bileşenleri içerir.
Contains only components according to TS EN 934-1 Annex A.1
Tehlikeli Maddeler / Dangerous Substances : Tamamen Ek ZA’ye uygundur. / Comply with annex ZA.
+20ºC’de, %50 bağıl nem koşullarında elde edilmiştir. / Is produced at +20ºC, %50 relative humidity conditions.