Aydos Winset A2 | Aydos Yapı Kimyasalları

Aydos Winset A2

Setting retardant concrete admixture

Standard

Bayındırlık Bakanlığı Poz No: 04.613/2
TS EN 934 - 2 Çizelge 8 Priz geciktirici beton katkısı

Description

Aydos® Winset A2 modified polymer based concrete admixture that delays the setting as much as needed. When preferred under hot climatic conditions, it prolongs the workability duration of concrete and facilitates placements and surface finishes. It allows for continuous concrete pouring without cold joint formation. Since it slows the setting rate, it prolongs the hydration of cement with water and ensures prolonged workability by slowing the hydration temperature increases.

• Used in concretes that require high final strength,
• Used in concretes that require high final strength,
• Used in pouring concrete at high temperatures,
• In pouring concrete with a long period of delay,
• In production of concrete with thin and compact reinforcements for difficult compacting,
• In concretes that are required to have compact and smooth surface,
• Areas which will be subjected to vibration again.

• Ensures producing strong and high-quality concrete.
• Ensures controlled prolongation of setting of concrete.
• Does not have adverse effects on final strengths.
• Reduces creeping and contraction.
• Extends the setting time of concrete.
• Increases workability.
• Minimizes the effects of temperature.
• Reduces segregation and bleeding of concrete.
• Ensures easy pumping.
• Prevents the concrete from losing its viscosity fast, provides for extended viscosity protection depending on the type of cement used.
• Prevents shrinkage cracks that may result from high hydration temperatures.

• Is suggested to be used as 0.7 – 1.8 kg for 100 kg binder (cement microsilica fly ash).
• Dosage of contribution is based on the aggregate properties, water quality, concrete class, water-cement ratio and temperature of place. Therefore, it is recommended to determine the dose by preparing test mixtures in a laboratory.

Kimyasal İçeriği / Chemical Contents	:	Polikarboksilat esaslı / Polycarboxylate based
Görünüm-Renk / Appearance-Colour	:	Kahverengi sıvı / Brown liquid
Yoğunluk / Density	:	1.05 ± 0.02 kg/l.	ISO 758
pH Değeri / pH Value	:	4.5 ± 1	TS 6365 EN 1262
Klor İçeriği / Chloride Content (Cl)	:	< % 0.1	TS EN 480-10
Alkali İçeriği / Alkali Content	:	< % 7	TS EN 480-12
Donma Noktası / Freezing Point	:	-3 ºC
Korozyon Davranışı / Corrosion Behavior	:	Sadece TS EN 934-1 Ek A.1’de verilen bileşenleri içerir. Contains only components according to TS EN 934-1 Annex A.1
Tehlikeli Maddeler / Dangerous Substances	:	Tamamen Ek ZA’ye uygundur. / Comply with annex ZA.
+20ºC’de, %50 bağıl nem koşullarında elde edilmiştir. / Is produced at +20ºC, %50 relative humidity conditions.

ENTER THE WORD YOU WANT TO SEARCH